Descargar Firmware Nokia C2 02 Rm 693 |TOP|
LINK ->->->-> https://cinurl.com/2tANnX
How to Flash Nokia C2-02.1 RM-693 RM-692 Firmware
If you have a Nokia C2-02.1 phone that is stuck on the logo screen, infected by a virus, or needs to be restored to factory settings, you may need to flash it with a new firmware. Flashing is the process of installing a new software version on your phone using a computer and a USB cable. In this article, we will show you how to flash Nokia C2-02.1 RM-693 RM-692 firmware using a simple and free tool.
What You Need
A Nokia C2-02.1 phone with RM-693 or RM-692 product code. You can check your product code by typing *#0000# on your phone.
A USB cable compatible with your phone.
A computer with Windows operating system.
The firmware file for your phone model. You can download it from here[^2^] or here[^3^]. Make sure you download the correct file for your product code.
The flashing tool called Phoenix Service Software. You can download it from here[^1^].
How to Flash
Install Phoenix Service Software on your computer and run it as administrator.
Connect your phone to your computer using the USB cable. Make sure your phone is switched off.
On the Phoenix Service Software window, click on File > Open Product. Select your phone model from the list and click OK.
Click on Flashing > Firmware Update. A new window will open with some information about your phone.
Click on the Browse button next to Product Code and select the firmware file that you downloaded earlier. The software will automatically detect the firmware version and variant.
Click on Refurbish button at the bottom of the window. A warning message will appear asking you to confirm the flashing process. Click Yes to proceed.
The software will start flashing your phone. Do not disconnect your phone or close the software until the process is completed. You will see a progress bar and some messages on the screen.
When the flashing is done, you will see a message saying "Firmware updating succeeded". Click OK to close the window.
Disconnect your phone from your computer and switch it on. It may take some time for your phone to boot up for the first time after flashing.
Congratulations! You have successfully flashed your Nokia C2-02.1 RM-693 RM-692 firmware.
Troubleshooting
If you encounter any problems during or after flashing, here are some possible solutions:
If your phone does not turn on after flashing, try charging it for a while and then switch it on again.
If your phone does not connect to your computer or is not detected by Phoenix Service Software, try using a different USB port or cable.
If you get an error message saying "The flashing failed" or "The connection between PC and phone failed", try restarting your computer and phone and repeat the flashing process.
If you get an error message saying "The selected variant does not match with current product code", make sure you have downloaded the correct firmware file for your product code.
Disclaimer
Flashing your phone may void your warranty and erase all your data. We are not responsible for any damage or data loss that may occur during or after flashing. Flash at your own risk and follow the instructions carefully. 061ffe29dd