The ExLink connector is a special type of cable that enables you to connect your PC computer to the TV and access the Serial mode. The cable has two different connectors at each end: one is a 3.5mm jack, similar to the ones used for audio devices, and the other is an RS232 (Serial) DB9 connector, which is a standard interface for serial communication. By using the ExLink connector, you can communicate with the TV using a serial Communications Software, such as Hyperterminal or Putty, which are available for Windows or Linux operating systems.
The Serial mode is a hidden feature of some TVs that allows you to control and configure the TV settings using serial commands. You can enter the Serial mode by pressing a specific combination of buttons on the remote control or by using the ExLink connector. The Serial mode can be useful for troubleshooting, testing, or customizing the TV functions.
The serial Communications Software is a program that lets you send and receive data over a serial connection. You can use it to communicate with the TV using the ExLink connector and the Serial mode. To do this, you need to configure the software with the correct settings for the serial port, such as baud rate, parity, data bits, and stop bits. You also need to know the format and syntax of the serial commands that the TV supports.
The ExLink connector, the Serial mode, and the serial Communications Software are powerful tools that can help you interact with your TV in different ways. However, they are not intended for casual users and they may void your warranty or damage your TV if used incorrectly. Therefore, you should use them with caution and only if you know what you are doing. 061ffe29dd